BALL SIPHON FOR HVAC CONDENSATE DRAIN

A connector made from propylene, resistant to corrosion and decay, to be used to drain the condensate in the air conditioning systems at low pressure. The product in the standard package is designed for the maximum pressure of 600 Pa.

BALL SIPHON

FEATURES OF BALL SIPHON

In the case of extremely low pressure, extension tube or knee can be shortened, or may be placed in inclined position (see size table).
Built-in ball valve prevents the suction of air through the conclusion in the absence of condensate. It is easy to maintain and care. When connect socket with connector, socket should be moistened with water and soap. Each HVAC condensate drain system should be provided with a separate siphon. Pipes after the connector may be mounted on the market range tubes.

3d model

Ball siphon 3D MODEL

scheme

HOW IT WORKS

WORKING PRINCIPLE OF BALL SIPHON
FOR HVAC CONDENSATE DRAIN

How does siphon work in the case of elimination of condensate, please watch in the next video.

HEATER

Ball siphon HEATER

Use cable 8 mm outside diameter
Connect to 230 Vac mains supply
The heater will fully regulate itself

Assembly heater in ball slot

Data 5104-7310

Power	230 Vac
Fuse	400 mA max
Tempsensor	10K 25 °C
Heating element	33E/5W

Assembly holes must be used and capped to warrant IP 66

MAIN ADVANTAGES

MAIN ADVANTAGES OF BALL SIPHON FOR AHU, HVAC CONDENSATE DRAIN

The size is very compact
The valve closes the passage when not needed, avoiding bacteria, dirty air coming into the unit.
It works in both conditions PA+ or even PA-Pressure higher than 600 PA. It is the perfect solution for compact unit.
It is possible to add a heater at 230 V or 24 V in case the units are outside to avoid frost danger.